Contents 178 pieces:

13 double open-ended spanners No. 12a/13: 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"

21 combination spanner No. 13a: 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1"

9 double-ended ring spanners No. 230a: 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 7/16 x 1/2; 1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4; 13/16 x 7/8; 15/16 x 1"

1 open-ended spanner, adjustable No. 4025: SW. max. 13 mm

1 socket spanner set 1/4" No. 40aD/30/7QR: No. 40a: 1/8"; No. 40aD: 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"; No. 40aDL: 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"; No. 402a: 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2"; No. 400QR; 405/2QR (2x); 405/6QR; 407QR; 412; 415 SG-QR

1 square drive adaptor No. 409: 3/8 to 1/4"

1 bit fine-tooth ratchet 1/4" No. 415SGB N: L. 117 mm

4 sockets 3/8" No. 46a: 7/16; 1/2; 9/16; 5/8"

1 extension 3/8" No. 427/18: L. 455 mm

1 square drive adaptor No. 431: 1/4 to 3/8"

1 socket spanner set 3/8" No. 45a/22/8QR: No. 45a: 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1"; No. 47a: 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4"; No. 427/10QR; 427/6QR; 427/3QR; 428QR; 435SG-QR; 442; 443; 453QR

4 bits Phillips No. 1220-1223: PH0; PH1; PH2; PH3

1 bit for TORQ-SET® screws No. 13010: 0; 1; 2; 3; 4; 5; 6; 8; 10

1 bit magazine holder 1/4" No. 4006/1: L. 190 mm

1 bit holder 1/4" No. 12503: L. 65 mm

3 slotted screwdrivers No. 4622: 1.0 x 5.5 x 100; 1.2 x 8.0 x 150; 1.6 x 10.0 x 175 mm

3 cross-head screwdrivers No. 4632: PH1; PH2; PH3

1 offset screwdriver set No. 10760aCV/13: 0.028; 0.035; 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4"

1 pin punch and centre punch set No. 105-8/6 K: No. 105: 120 x 10 mm; No. 108: 150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6 mm

1 triangular special scraper No. 10670: L. 215 mm

1 plastic hammer No. 10955: Ø 27 mm

1 locksmith's hammer No. 10961: 300 g

1 magnetic lifter No. 12600: 500 g

1 telescopic mirror No. 12921N: Ø 50 mm

1 claw gripper No. 12922E: Ø 6 mm

1 rolling tape measure No. 12935/3: L. 3 m

1 steel ruler No. 13110: L. 300 mm

1 combination pliers No. 6501: L. 180 mm

1 mechanic's flat nose round pliers No. 6510: L. 190 mm

1 mechanic's flat nose round pliers No. 6531: L. 170 mm

1 water pump pliers No. 6551: L. 240 mm

1 wire twisting pliers No. 6575: L. 280 mm

1 side cutter No. 6600: L. 180 mm

1 cable cutter No. 12320: Blade l. 90 mm

1 scriber No. 12321: L. 250 mm

1 calliper gauge No. 12900: Measuring range 150 mm

1 LED torch No. 13126-1: 250 lm

1 wire cutter No. 13148: L. 150 mm